ioXpander 2x2

PowerG + Input/Output Module

The ioXpander 2x2 extends control of third-party devices while maintaining secure PowerG + communication with flexible configurations using one single module to connect up to four hardwired devices to the system or adding two hardwired devices and controlling two hardwired elements.

Add Control of Third Party Devices
User Configurable: Flexible configuration of two inputs/two outputs or four inputs
Battery Pull Tab: Device enters pairing mode once pull tab is removed saving time during installation
Modern Look and Feel: Featuring a more visually appealing white matte finish

PowerG + Input/Output Module

Features

868 to 869 MHz Frequency
3 Year Battery Life for Two Inputs/Two Outputs Configuration (typical use)
Two Factor Authentication
Front cover and back cover tamper detection
Signal strength LED indication during installation
PowerG two-way frequency hopping spread spectrum time-division multiple access (FHSS-TDMA) technology
Low battery indication

Default configuration of two inputs/two outputs. Configuration can be changed to 4 inputs, if needed
5 Year Battery Life for Four Inputs Configuration
Battery Level Reporting
Dealer lockdown
Discreet periodic supervision message is transmitted automatically to the control panel at regular interval
User-selectable operation of auxiliary input as Normally open, Normally closed, End of Line (EOL), or Double EOL
Temperature sensing and reporting

Resources

Installation Guide

English - PowerG + Input/Output Module Installation Guide

VIEW

Marketing Collateral

English - PowerG + Input/Output Module Marketing Collateral

VIEW

Back